K
Katherine ThompsonSep 6, 2025
What to do if my Dell 88HPH has System board failure (included BIOS corruption or ROM error)?
- JJoseph NunezSep 6, 2025
Flash latest BIOS version. If the problem persists, replace the system board.
To Next PageTo Next PageWhat to do if my Dell 88HPH has System board failure (included BIOS corruption or ROM error)?
Flash latest BIOS version. If the problem persists, replace the system board.
What to do if my Dell 88HPH has Invalid memory installed?
Reset and swap memory modules among the slots. If the problem persists, replace the memory module.
What to do if my Dell 88HPH Desktop has Memory/RAM failure?
Reset and swap memory modules among the slots. If the problem persists, replace the memory module.
What to do if my Dell Desktop says no memory/RAM detected?
Confirm that the memory module is installed properly. If the problem persists, replace the memory module.
What to do if my Dell 88HPH has a CPU failure?
Run the Dell Support Assist/Dell Diagnostics tool. If the problem persists, replace the system board.
How to fix a system board failure (BIOS corruption or ROM error) on a Dell 88HPH?
To address a system board failure, including BIOS corruption or ROM error, on your Dell Desktop, start by flashing the latest BIOS version. If the problem persists, replace the system board.
How to resolve PCI or Video card/chip failure on Dell 88HPH?
If your Dell Desktop has a PCI or Video card/chip failure, replace the system board.
What to do if LCD failure (EC detection of power rail failure) on Dell 88HPH?
If your Dell Desktop's LCD is failing due to EC detection of power rail failure, replace the system board.
How to fix LCD failure (SBIOS message) on Dell 88HPH?
If your Dell Desktop's LCD is failing (SBIOS message), replace the LCD module.
How to resolve ungraceful EC code flow errors on Dell Desktop?
If your Dell Desktop experiences a generic catch-all for ungraceful EC code flow errors, disconnect all power sources (AC, battery, coin cell) and drain flea power by pressing and holding down the power button for 3~5 seconds.
General