Dell Alienware 15 - Replacing the Computer Base; Procedure; Post-Requisites

Replacing the computer
base
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
Before working inside your computer.
After working inside your computer, follow the instructions
in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
Place the computer base on a flat surface.
Post-requisites
1 Replace the power-adapter port.
2 Replace the battery.
3 Replace the fans.
4 Follow the procedure from step 4 to step 11 in “Replacing the system
board".
5 Replace the display assembly.
6 Replace the front AlienFX LED board.
7 Replace the speakers.
8 Replace the hinge covers.
9 Follow the procedure from step 5 to step 11 in “Replacing the palm rest”.
10 Replace the wireless card.
11 Replace the I/O board.
12 Follow the procedure from step 4 to step 7 in “Replacing the hard drive".
13 Replace the solid-state drives.
14 Replace the memory modules.
15 Replace the base panel.
138