Connect an Alienware Graphics Amplifier to enhance the graphics performance.
6. Power-adapter port
Connect a power adapter to provide power to your computer and charge the battery.
Left
1. Security-cable slot (for Noble locks)
Connect a security cable to prevent unauthorized movement of your computer.
2. USB 3.1 Gen 2 (Type-C) port
Connect to external storage devices. Provides data transfer speeds up to 10 Gbps.
NOTE: This port does not support video/audio streaming.
3. USB 3.1 Gen 1 port with PowerShare
Connect peripherals such as external storage devices and printers.
Provides data transfer speeds up to 5 Gbps. PowerShare enables you to charge your USB devices even when your computer is
turned off.
NOTE: If the charge on your computer’s battery is less than 10 percent, you must connect the power adapter to charge your
computer, and USB devices connected to the PowerShare port.
NOTE: If a USB device is connected to the PowerShare port before the computer is turned off or in hibernate state, you
must disconnect and connect it again to enable charging.
NOTE: Certain USB devices may not charge when the computer is turned off or in sleep state. In such cases, turn on the
computer to charge the device.
4. Microphone/headphone port (configurable)
Connect an external microphone for sound input or headphones for sound output.
5. Headset port
Connect headphones or a headset (headphone and microphone combo).
Right
1. USB 3.1 Gen 1 port
Connect peripherals such as external storage devices and printers. Provides data transfer speeds up to 5 Gbps.
10
To Next Page
Loading...
Need help?
General
