What to do if Dell B5460dn Mono Laser prompts to 'Change [paper source] to [custom string]'?
If your Dell printer displays 'Change [paper source] to [custom string] load [orientation]', load the correct size and type of paper in the tray, and then press on the printer control panel. Alternatively, you can cancel the print job.
What to do if Dell B5460dn Mono Laser Printer says 'Cartridge very low'?
If your Dell printer displays 'Cartridge very low', you may need to replace the toner cartridge very soon. If necessary, press to clear the message and continue printing.
What does 'Cartridge nearly low' mean on Dell B5460dn Mono Laser?
If your Dell printer displays 'Cartridge nearly low', press on the printer control panel to clear the message and continue printing, if necessary.
How to fix 'Too many flash options installed' error on Dell B5460dn Mono Laser Printer?
If your Dell printer displays 'Too many flash options installed', turn off the printer, unplug the power cord, remove the extra flash memory, connect the power cord, and then turn the printer back on.
What to do if my Dell Printer says 'Non-Dell [supply type]'?
To resolve a 'Non-Dell [supply type]' message on your Dell printer, you have two options. First, you can accept the risks of using non-genuine supplies by pressing and holding certain buttons simultaneously for 15 seconds to clear the message. Alternatively, you can remove the non-genuine supply and install a genuine Dell supply or part.
What does 'Disk near full' mean on my Dell B5460dn Mono Laser?
If your Dell printer displays 'Disk near full. Securely clearing disk space', press on the printer control panel to clear the message. You can also delete fonts, macros, and other data stored in the printer hard disk, or install a printer hard disk with higher capacity.
What to do if Dell Printer shows 'Defective flash detected'?
If your Dell printer displays 'Defective flash detected', replace the defective flash memory card. Alternatively, you can press on the printer control panel to ignore the message and continue printing, or cancel the current print job.
What causes 'Cartridge, imaging unit mismatch' in Dell Printer?
To resolve a 'Cartridge, imaging unit mismatch' error on your Dell printer, check if the toner cartridge and imaging unit are both MICR (Magnetic Imaging Content Recording) or non-MICR supplies. If they don't match, change either the toner cartridge or imaging unit so that both are either MICR or non-MICR supplies.
How to fix 'Disk full' error on Dell B5460dn Mono Laser Printer?
If your Dell printer displays 'Disk full', you can press on the printer control panel to clear the message and continue printing. You can also delete fonts, macros, and other data stored on the printer's hard disk, or install a printer hard disk with a larger capacity.
What to do if Dell printer says 'Complex page, some data may not have printed'?
If your Dell printer displays 'Complex page, some data may not have printed', reduce the number and size of fonts, the number and complexity of images, and the number of pages in the print job. Alternatively, cancel the print job or install additional printer memory.
General| Print Technology | Laser |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Standard Memory | 512 MB |
| Output Capacity | 500 sheets |
| Processor Speed | 800 MHz |
| Weight | 52.9 lbs |
| Monthly Duty Cycle | 275, 000 pages |
| Input Capacity | 650 sheets |
| Connectivity | USB 2.0, Ethernet |
| First Page Out Time | 4.4 seconds |
| Maximum Paper Size | A4, Legal |
| Operating System Compatibility | Windows, Linux, Mac OS |
| Duplex Printing | Standard |
To Next Page
