Dell D10U - Power LED issue; Diagnostic error messages

4. Follow the procedure in After working inside your computer.
M.2 PCIe SSD
Removing the M.2 PCIe SSD
NOTE: The instructions are applicable to M.2 SATA SSD also.
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side cover
b. 2.5 inch hard drive assembly
3. To remove the M.2 PCIe SSD:
a. Remove the single (M2X3.5) screw that secures the M.2 PCIe SSD to the system board [1].
b. Lift and pull out the PCIe SSD from its connector on the system board [2].
Disassembly and reassembly
53