Dell D11S - M.2 Pcie SSD

Installing optical drive
1. Insert the optical drive into the optical drive bay until it clicks into place.
2. Open the Front panel door.
3. Route the data cable and power cable under the drive cage.
4. Connect the data cable and power cable to the connectors on the optical drive.
5. Close the front panel door.
6. Install the:
a. Front bezel
b. Side Cover
7. Follow the procedure in After working inside your computer.
M.2 PCIe SSD
Removing optional M.2 PCIe SSD
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side Cover
b. Front bezel
3. Open the Front panel door.
4. To remove the M.2 PCIe SSD:
30
Field service information