Installing speaker
1. Insert the speaker into the slot.
2. Press the speaker module until it clicks into place.
3. Connect the speaker cable to the connector on the system board.
4. Close the front panel door.
5. Install the:
a. Front bezel
b. Side Cover
6. Follow the procedure in After working inside your computer.
Coin-cell battery
Removing coin cell battery
1. Follow the procedure in Before working inside your computer.
2. Remove the:
a. Side Cover
b. Front bezel
c. Expansion card
3. Open the Front panel door.
Field service information
41
To Next Page
Loading...
