Feature Specification
• Line out connector
Network adapter RJ-45 connector
Serial PS2 and serial connector (optional)
USB 2.0 (front/back/internal) 0/2/1
USB 3.0 (front/back/internal) 2/2/0
Video
• 15-pin VGA connector (optional)
• 20-pin DisplayPort connector
• 19-pin HDMI connector
NOTE: Available video connectors may vary based on the optional graphic board selected.
Table 28. Controls and lights
Feature Specification
Front of the computer
Power button light White light — Solid white light indicates power-on state; slow blinking
white light indicates sleep state of the computer.
Drive activity light White light — Slow blinking white light indicates that the computer is
reading data from or writing data to the hard drive.
Back of the computer
Link integrity light on integrated network
adapter
Green — A 10 Mbps connection exists between the network and the
computer.
Green — A 100 Mbps connection exists between the network and the
computer.
Orange — A 1000 Mbps connection exists between the network and
the computer.
Off (no light) — The computer is not detecting a physical connection
to the network.
Network activity light on integrated network
adapter
Yellow light — A breathing yellow light indicates that network activity
is present.
Power supply diagnostic light Green light — The power supply is turned on and is functional. The
power cable must be connected to the power connector (at the back
of the computer) and the electrical outlet.
Table 29. Power
Items Wattage Voltage
Power adapter 65 W 19.5 V DC, 3.34 A
Coin cell battery 3 V CR2032 lithium coin cell
Specifications 43
To Next Page
Loading...
