Dell D19M Setup And Specifications

Table 18. System Conguration
Option Description
Integrated NIC Allows you to control the on-board LAN controller. The options are:
• Enable UEFI Network stack
• Disabled
• Enabled
• Enabled w/PXE (default)
NOTE: Depending on the computer and its installed devices, the items listed in this section
may or may not appear.
Serial Port Identies and denes the serial port settings. You can set the serial port to:
• Disabled
• COM1 (default)
• COM2
• COM3
• COM4
SATA Operation Allows you to congure the operating mode of the integrated hard drive controller.
• Disabled = The SATA controllers are hidden
• AHCI
• RAID On (default)
Drives Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-2
• SATA-3
• M.2 PCIe SSD-0
Default Setting: All drives are enabled.
Smart Reporting This eld controls whether hard drive errors for integrated drives are reported during system startup.
This option is disabled by default.
USB Conguration Allows you to enable or disable the integrated USB controller for:
• Enable Boot Support
• Enable Front USB Ports
• Enable Rear USB Ports
All the options are enabled by default.
Front USB Conguration Allows you to enable or disable the Front USB conguration. The options are:
• Front Port 1 (Left)*
• Front Port 2( Right)*
• Front Port 3 (Left)*
• Front Port 4 (Right)*
All the options are enabled by default.
* denotes a USB 3.0-capable port
Rear USB Conguration Allows you to enable or disable the rear USB conguration. The options are:
System setup 17

Dell D19M Specifications

General

Brand	Dell
Model	D19M
Category	Desktop
Language	English