Dell Diagnostics
When to Use the Dell Diagnostics
If you experience a problem with your computer, perform the checks in "Solving Problems" and run the Dell Diagnostics before you contact Dell for technical
assistance. Running the Dell Diagnostics may help you resolve the problem without contacting Dell. If you do contact Dell, the test results can provide
important information for Dell's service and support personnel.
The Dell Diagnostics allows you to:
l Perform express, extended, or custom tests on one or all devices.
l Select tests based on a symptom of the problem you are having.
l Choose how many times a test is run.
l Display test results.
l Suspend testing if an error is detected.
l Access online help information that describes the tests and devices.
l Receive status messages that tell you whether tests completed successfully.
l Receive error messages if problems are detected.
Starting the Dell Diagnostics
Start the Dell Diagnostics from either your hard drive or from the Dell Dimension ResourceCD.
Starting the Dell Diagnostics From Your Hard Drive
1. Shut down and restart the computer.
2. WhentheDELL™logoappears,press<F12>immediately.
If you wait too long and the Microsoft®Windows®logo appears, continue to wait until you see the Windows desktop. Then shut down your computer
through the Start menu and try again.
3. When the boot device list appears, highlight Boot to Utility Partition and press <Enter>.
4. When the Dell Diagnostics Main Menu appears, select the test you want to run.
Starting the Dell Diagnostics From the ResourceCD
1. Insert the ResourceCD into the CD drive.
2. Shut down and restart the computer.
WhentheDELL™logoappears,press<F12>immediately.
If you wait too long and the Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer through the
Start menu and try again.
3. When the boot device list appears, highlight IDE CD-ROM Device and press <Enter>.
4. Select the IDE CD-ROM Device option from the CD boot menu.
5. Select the Boot from CD-ROM option from the menu that appears.
6. Type 1 to start the ResourceCD menu.
7. Type 2 to start the Dell Diagnostics.
8. Select Run the 32 Bit Dell Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your platform.
9. When the Dell Diagnostics Main Menu appears, select the test you want to run.
Dell Diagnostics Main Menu
1. After the Dell Diagnostics loads and the Main Menu screen appears, click the button for the option you want.
To Next Page
Loading...
