Dell Dimension 5100C - CD;DVD Drive; Removing a CD;DVD Drive


4. Connect the power cable and the serial ATA data cable to the drive.

5. Ensure that all connectors are properly cabled and firmly seated.

6. Slide the drive into place until you feel a click or feel the drive securely installed.

7. Replace the computer cover.

8. Connect your computer and devices to electrical outlets, and turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
CD/DVD Drive



Removing a CD/DVD Drive
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.