Dell Dimension V333c - Page 78

A-4 Dell Dimension V xxx and V xxx c Systems Service Manual
7DEOH $ $GYDQFHG 6FUHHQ 0HQX 2SWLRQV
2SWLRQ )XQFWLRQ
Plug & Play
O/S
Determines whether the system is configured to
support Plug and Play devices from the operating
system or from the system BIOS. Leave this option
set to
No
so the BIOS handles all Plug and Play
operation.
NOTE: Be sure this option is set to
No
before run-
ning Dell Diagnostics. Otherwise, some diagnos-
tics may incorrectly fail.
Reset
Configura-
tion Data
Permits resetting Plug and Play configuration data
to default values.
Yes
resets the data;
No
(default)
retains the current Plug and Play settings. If set to
Yes
, configuration data reverts to default values the
next time the system boots. This option automati-
cally reverts back to the
No
setting.
Numlock
Selects the power-on state for Num Lock. Options
are
Auto
(default),
On
, and
Off
.
Peripheral
Configuration
Displays the
Peripheral Configuration
submenu.
Refer to “Peripheral Configuration Submenu”
found next in this appendix.
IDE
Configuration
Displays the
IDE Configuration
submenu. Refer to
“IDE Configuration Submenu” found later in this
appendix.
Diskette
Options
Displays the
Diskette Options
submenu. Refer to
“Diskette Options Submenu” found later in this
appendix.
DMI Event
Logging
Displays the
DMI Event Logging
submenu. Refer
to “DMI Event Logging Submenu” found later in
this appendix.
Video
Configuration
Displays the
Video Configuration
submenu. Refer
to “Video Configuration Submenu” found later in
this appendix.
Resource
Configuration
Displays the
Resource Configuration
submenu for
allocating IRQs and memory ranges. Refer to
“Resource Configuration Submenu” found later in
this appendix.
NOTE: The Glossary in the Online Guide defines abbreviations and acronyms.