Dell E-Port Plus II - User Manual

CAUTION: Before you set up
and use your E-Port Plus II, see the
support documentation that shipped
with your computer or go to
dell.com/regulatory_compliance for
regulatory and safety information.
NOTE: Before you initially connect
your laptop to the E-Port Plus II, the
operating system must complete its
setup process. For further information
see the Dell™ E-Port Plus II User’s
Guide on support.dell.com/support/
systemsinfo/documentation.aspx.
Set ting Up Your Dell™ E-Port Plus II
1
Connect power
2
Slide switch left if battery extends from back of laptop
4
Center laptop with E-Port Plus II and push down to click into place
3
Adjust lock/unlock switch
XOOOOO
RMSD
XOXOOO
XOXOOO
PWFP9ap0:T5YC3cc0.qxd 1/12/2012 1:14 PM Page 1

Dell E-Port Plus II Specifications

General

Product Type	Docking Station
Connectivity Technology	Wired
Network	Gigabit Ethernet
Audio	Audio In/Out
Security	Kensington lock slot

Summary

Setting Up Your Dell E-Port Plus II

Connect Power

Connect the power adapter to the E-Port Plus II and the wall outlet for operation.

Adjust Battery Switch for Protrusion

Slide the switch left if the laptop battery extends from the back for proper connection.

Adjust Lock;Unlock Switch

Set the lock/unlock switch to secure or release the laptop connection.

Dock Laptop into E-Port Plus II

Center the laptop and push down until it clicks into place on the E-Port Plus II.

Dell E-Port Plus II Component Identification

E-Port Plus II External Connectors

Identifies all external ports on the E-Port Plus II docking station for connectivity.

E-Port Plus II Internal Components

Identifies key internal parts of the E-Port Plus II, such as the battery bar and eject button.