Dell E156FPc User Manual

Dell E156FPc
1
15” LCD MONITOR
DELL E156FPc
THESE DOCUMENTS ARE FOR REPAIR SERVICE INFORMATION ONLY.EVERY REASONABLE EFFORT
HAS BEEN MADE TO ENSURE THE ACCURACY OF THIS MANUAL; WE CANNOT GUARANTEE THE
ACCURACY OFTHIS INFORMATION AFTER THE DATE OF PUBLICATION AND DISCLAIMS RELIABILITY FOR
CHANGES, ERRORS OR OMISSIONS.
Service Manual

Dell E156FPc Specifications

General

Brand	Dell
Model	E156FPc
Category	Monitor
Language	English

Summary

Revision List

Monitor Specifications

LCD Panel Specifications

Details about the LCD panel, including size, type, and resolution.

Input Specifications

Technical input requirements like frequency, resolution, and connector types.

Power and Environmental Specifications

Power requirements, operating conditions, and physical weight of the monitor.

LCD Monitor Description

Monitor Block Diagram

Visual representation of the monitor's internal components and their interconnections.

Operation Instructions

General Instructions

Basic steps for connecting and powering on the monitor.

Control Buttons

Identifies and describes the function of each control button on the monitor.

On-Screen Menu/Display (OSD)

Explains how to navigate and use the On-Screen Display menus for settings.

Adjusting the Picture

Guides users on how to adjust picture settings like position, image, color, and OSD.

Color Settings

Explains how to adjust color temperature and saturation using presets or custom settings.

OSD Settings

Details how to control OSD location, hold time, and locking features.

Language and Factory Reset

Procedures for changing OSD language and restoring factory default settings.

Input/Output Specification

Input Signal Connector

Pinout details for the VGA connector and signal types.

Factory Preset Display Modes

Lists supported VESA and IBM display modes with timing specifications.

Power Supply Requirements

Specifies AC voltage, frequency, current, and surge requirements.

Panel Specification

Lists physical and electrical characteristics of the LCD panels used.

Optical Characteristics

Optical performance metrics like contrast, luminance, response time, and viewing angles.

Block Diagram

Monitor Exploded View

Visual breakdown of monitor components with part numbers and names.

Software Flow Chart

Illustrates the monitor's operational logic and decision points.

Electrical Block Diagram

Circuit diagrams showing the main board and power supply connections.

Disassembly Flow Chart

Remove Stand

Step-by-step guide to detach the monitor stand.

Remove Bezel

Instructions for carefully removing the monitor's front bezel.

Remove Rear Cover

Procedure for removing the rear cover of the monitor.

Remove Shields and Connectors

Steps to remove protective shields and disconnect internal cables and connectors.

Remove Power and Main Boards

Instructions for removing the power board and main board components.

Schematic Diagram

Main Board Schematic

Circuit diagram detailing the components and connections of the main logic board.

Power Board Schematic

Circuit diagram for the power supply unit, including output stages.

2-Lamp Inverter Schematic

Specific schematic for the 2-lamp inverter circuit.

PCB Layout

Main Board PCB Layout

Physical layout of components on the main logic board.

Inverter/Power Board PCB Layout

Physical layout of components on the inverter/power board.

Key Board PCB Layout

Physical layout of the control key board.

Maintainability

Equipments and Tools Requirement

Lists necessary tools and equipment for maintenance and repair tasks.

Trouble shooting

Main Board Troubleshooting

Troubleshooting guide for issues related to the main board, including display problems.

Panel Power Circuit Troubleshooting

Troubleshooting steps for power-related issues on the panel circuit.

Inverter Control Circuit Troubleshooting

Troubleshooting steps for inverter control circuit issues.

Inverter/Power Board Troubleshooting

Troubleshooting guide for no power issues on the inverter/power board.

No Backlight Troubleshooting

Diagnostic steps for backlight failures and related circuits.

Key Board Troubleshooting

Troubleshooting steps for issues with the keypad or OSD functionality.

White Balance and Luminance Adjustment

sRGB Color Temperature Adjustment

Calibrating the display to 6500K for standard color reproduction.

Color1 (9300°K) Color Temperature Adjustment

Calibrating the display to 9300K for cooler color tones.

Color2 (5700°K) Color Temperature Adjustment

Calibrating the display to 5700K for warmer color tones.

Max Brightness Measurement

Procedure to measure and set the maximum brightness level of the display.

EDID Content

ISP (In System Program) User Manual

ISP Writer Preparation and Connection

Steps for connecting hardware and preparing for in-system programming.

Using the ISP Writer Software

Guide on using the ISP writer software interface for programming.

Executing ISP Process

Detailed steps for performing the in-system programming process.

Check List

White Balance Adjustment Steps

Procedure for adjusting white balance and luminance settings using specific instruments.

DDC Writing Procedure

Instructions for writing DDC information to the monitor using specific software.

BOM List

Definition of Pixel Defects

Pixel Defect Types (CLAA150XP01)

Defines various types of visual and electrical pixel defects for the CLAA150XP01 panel.

Dot Defect Definitions (LM150X08)

Defines bright, dark, and total dot defects for the LM150X08 panel.

Polarizer Defects

Defines criteria for linear and circular defects on the polarizer layer.

Foreign Material, Line Defect, Bezel Appearance

Specifies limits for foreign material, line defects, and bezel appearance.