What to do if I cannot adjust my Dell E1914H with the front panel buttons?
If you cannot adjust the Dell monitor with the buttons on the front panel, turn off the monitor, unplug the power cord, plug it back in, and then turn on the monitor.
Why doesn't the picture fill the entire screen on my Dell E1914H Monitor?
To resolve the issue of the picture not filling the entire screen on your Dell monitor, be aware that due to different video formats (aspect ratio) of DVDs, the monitor may not display in full screen. You can also run the built-in diagnostics.
What to do if there is no sound from my Dell E1914H Monitor's soundbar?
To address issues with no sound for a system where the Soundbar draws power from an AC adapter, turn the Power/Volume knob on the Soundbar clockwise to the middle position and check if the power indicator (white LED) on the front of the Soundbar is illuminated. Confirm that the power cable from the Soundbar is plugged into the adapter.
How do I fix stuck-on pixels on my Dell E1914H?
To address stuck-on pixels on your Dell monitor, try cycling the power on and off. Note that a pixel that is permanently off is a natural defect that can occur in LCD technology.
What does 'No Input Signal' mean on a Dell monitor?
If you see a 'No Input Signal' message when user controls are pressed on your Dell monitor, check the signal source. Ensure the computer is not in power saving mode by moving the mouse or pressing any key on the keyboard. Verify the signal cable is plugged in properly. Reset the computer or video player.
What to do in case of safety-related issues with Dell E1914H Monitor?
If you are experiencing safety-related issues with your Dell monitor, do not attempt any troubleshooting steps. Contact Dell immediately for assistance.
What to do if my Dell E1914H is missing color?
If your Dell monitor has missing color, perform a monitor self-test feature check. Also, ensure that the video cable connecting the monitor to the computer is properly connected and secure. Check for bent or broken pins in the video cable connector.
Why does my Dell E1914H have intermittent problems?
If you're experiencing intermittent problems with your Dell monitor, ensure that the video cable connecting the monitor to the computer is properly connected and secure. You can also try resetting the monitor to its factory settings. Additionally, perform a monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
Dell E1914H says 'No Input Signal' when pressing user controls, what to do?
If you are not getting any input signal when user controls are pressed on your Dell monitor, check the signal source. Ensure the computer is not in power-saving mode by moving the mouse or pressing any key on the keyboard. Check whether the signal cable is plugged in properly; re-plug the signal cable if necessary. If the problem persists, reset the computer or video player.
How to fix a Dell E1914H Monitor with no video and power LED off?
If your Dell monitor displays no video and the power LED is off, ensure the video cable connecting the monitor and computer is properly connected and secure. Also, verify the power outlet is functioning correctly by testing it with other electrical equipment. Make sure the power button is fully depressed, and check the LED Button option under Energy Setting in the On-Screen Display (OSD) menu.
Covers power management, pin assignments, panel, resolution, electrical, and preset modes.
Configuring multiple displays and selecting display styles in Windows.
How to access and use the monitor's OSD menu for settings.
Using built-in diagnostics and self-test features to identify monitor issues.
Addressing frequent symptoms like no video, poor focus, and screen jitter.
General| Screen Size | 18.5 inches |
|---|---|
| Resolution | 1366 x 768 |
| Panel Type | TN |
| Refresh Rate | 60 Hz |
| Aspect Ratio | 16:9 |
| Brightness | 200 cd/m² |
| Response Time | 5 ms |
| Connectivity | VGA |
| Viewing Angle | 90° (H) / 65° (V) |
| Power Consumption | 14W (typical) |
| Weight | 2.60 kg |
| Contrast Ratio | 600:1 (typical) |
To Next Page
