How to increase low volume on Dell E1916HV?
To increase low volume on your Dell Monitor, clear any obstructions between the Soundbar and the user. Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting. Set all Windows volume controls to their maximum. Increase the volume of the audio application. Test the Soundbar using another audio source.
What to do if my Dell Monitor has no video but the Power LED is on?
If your Dell Monitor has no video but the power LED is on, try the following: * Increase brightness and contrast via the OSD. * Perform a monitor self-test. * Check for bent or broken pins in the video cable. * Ensure the correct input source is selected. * Run the built-in diagnostics.
How to fix brightness problems on Dell E1916HV Monitor?
To resolve brightness issues on your Dell monitor, you can try resetting the monitor to factory settings. Also, try using Auto Adjust via the OSD. You may also adjust brightness and contrast controls using the OSD.
Why is there no sound on my Dell E1916HV Monitor?
To troubleshoot no sound on your Dell Monitor, first plug the audio line-in cable into the computer’s audio out jack. Ensure all volume controls are at maximum and mute is off. Play audio content on the computer. Turn the Power/Volume knob on the Soundbar clockwise to increase the volume. Clean and reseat the audio line-in plug. Finally, test the Soundbar with another audio source.
How to fix a Dell E1916HV Monitor with poor focus?
To correct poor focus on your Dell Monitor, try performing Auto Adjust via the OSD. You can also adjust the Phase and Pixel Clock controls via the OSD. Eliminate any video extension cables. If problems persist, reset the monitor to Factory Settings or change the video resolution to the correct aspect ratio (16:9).
What to do if Dell E1916HV Monitor cannot adjust with the buttons on the front panel?
If you cannot adjust your Dell monitor with the front panel buttons, turn off the monitor, unplug the power cord, plug it back in, and then turn the monitor on. Check if the OSD menu is locked; if it is, press and hold the button beside the Power button for 10 seconds to unlock it.
What to do if Dell E1916HV shows 'No Input Signal' when user controls are pressed?
If your Dell Monitor displays 'No Input Signal' when the user controls are pressed, check the signal source. Ensure that the computer is not in power saving mode by moving the mouse or pressing a key. Verify the signal cable is properly plugged in, and re-plug it if necessary. If the issue persists, reset the computer or video player.
What to do if the picture on my Dell E1916HV Monitor does not fill the entire screen?
Due to different video formats (aspect ratio) of DVDs, the Dell monitor may not display in full screen. Running the built-in diagnostics may also help.
How to fix distorted sound on Dell E1916HV?
To fix distorted sound on your Dell Monitor, clear any obstructions between the Soundbar and the user. Confirm that the audio line-in plug is completely inserted into the sound card jack. Set all Windows volume controls to their midpoints. Decrease the volume of the audio application. Turn the Power/Volume knob on the Soundbar counter-clockwise to lower the volume. Clean and re-seat the audio line-in plug. Troubleshoot the computer’s sound card. Test the Soundbar using another audio source. Avoid using an audio cable extension or audio jack converter.
What to do if my Dell monitor screen image is too small?
If the screen image on your Dell monitor is too small, check the Aspect Ratio setting in the Display OSD. Alternatively, reset the monitor to Factory Settings.
General| Input current | 1 A |
|---|---|
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Energy efficiency scale | A to G |
| Power consumption (max) | 17 W |
| Power consumption (off) | 0.2 W |
| Power consumption (standby) | 0.3 W |
| Power consumption (typical) | 8.6 W |
| Power consumption (PowerSave) | 10 W |
| Cable length | 1.8 m |
| Cable lock slot | Yes |
| Tilt angle range | -5 - 21 ° |
| Height adjustment | No |
| Cable lock slot type | Kensington |
| Panel mounting interface | 100 x 100 mm |
| Panel type | TN |
| Color gamut | 85 % |
| Pixel pitch | 0.3 x 0.3 mm |
| Screen shape | Flat |
| Backlight type | W-LED |
| Display diagonal | 19 \ |
| Display resolution | 1366 x 768 pixels |
| Display technology | LCD |
| Native aspect ratio | 16:9 |
| Vertical scan range | 56 - 76 Hz |
| Maximum refresh rate | 60 Hz |
| Horizontal scan range | 30 - 83 kHz |
| Viewable size diagonal | 470.1 mm |
| Viewable size, vertical | 230.4 mm |
| Viewing angle, vertical | 65 ° |
| Display number of colors | 16.78 million colors |
| Viewable size, horizontal | 409.8 mm |
| Viewing angle, horizontal | 90 ° |
| Display brightness (typical) | 200 cd/m² |
| Supported graphics resolutions | 1366 x 768 |
| DisplayPorts quantity | 0 |
| Certification | CECP |
| Product color | Black |
| Market positioning | Business |
| Doesn't contain | PVC |
| Sustainability certificates | RoHS, TCO, ENERGY STAR |
| Operating altitude | 0 - 5000 m |
| Non-operating altitude | 0 - 12191 m |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Cables included | AC, VGA |
| VGA cable length | 1.5 m |
| Harmonized System (HS) code | 85285210 |
Weight and Dimensions| Depth (with stand) | 167 mm |
|---|---|
| Width (with stand) | 445.4 mm |
| Height (with stand) | 359 mm |
| Weight (with stand) | 2720 g |
| Depth (without stand) | 51.5 mm |
| Height (without stand) | 266 mm |
| Weight (without stand) | 2260 g |
Lists all components included with the monitor, noting optional items.
Details the key features and capabilities of the Dell E1916HV, E2016HV, and E2216HV monitors.
Identifies the buttons and indicators on the front of the monitor for operation.
Shows the ports and connectors located on the back of the monitor.
Explains power saving modes and consumption for different monitor models.
Details the pin configuration for the 15-pin D-Sub connector.
Provides detailed specifications for screen type, dimensions, and performance.
Lists scan range and maximum resolutions supported by each monitor model.
Details monitor input voltage, frequency, current, and inrush current.
Lists supported display modes with frequency and sync polarity.
Provides detailed dimensions of the monitor with and without the stand.
Lists the weight of the monitor with and without the stand assembly.
Specifies temperature, humidity, and altitude limits for monitor operation.
Lists the heat dissipation in BTU/hour for each monitor model.
Explains the policy regarding pixel defects and acceptable levels.
Provides instructions and precautions for cleaning and maintaining the monitor.
Step-by-step guide on how to assemble and attach the monitor stand.
Instructions for connecting the monitor to a computer using a VGA cable.
Guidance on how to neatly arrange monitor and computer cables.
Steps to remove the VESA cover from the monitor panel.
Instructions for detaching the monitor stand assembly.
Specifies the screw dimensions and weight capacity for VESA mounting.
Details the procedure for mounting the monitor on a wall using a VESA kit.
Simple instruction on how to turn the monitor on.
Explains the function of each button on the monitor's front panel.
How to open and navigate the monitor's on-screen display menu.
How to adjust the monitor's brightness and contrast settings.
How to perform automatic screen adjustment for optimal display.
How to adjust the monitor's color settings, including input format and presets.
How to adjust the image aspect ratio (e.g., 16:9, 4:3).
How to adjust the horizontal and vertical position of the image on the screen.
How to adjust the image sharpness for clearer or softer display.
How to adjust pixel clock and phase for optimal image quality.
How to restore default display settings.
How to set the power LED indicator on or off.
How to restore default energy settings.
How to set the OSD display language.
How to adjust the OSD background transparency.
How to set the OSD display timer.
How to lock or unlock OSD adjustments to prevent unauthorized changes.
How to restore default OSD menu settings.
How to assign functions to the monitor's shortcut keys.
How to restore shortcut key settings to their default.
How to enable or disable DDC/CI for software control of monitor settings.
How to use LCD conditioning to reduce image retention.
How to restore default 'other' settings like DDC/CI.
How to reset all OSD settings to factory defaults.
Explains messages related to unsupported input timing and resolutions.
Message shown when disabling the DDC/CI function.
Message indicating the monitor has entered power save mode.
Message displayed when no video signal is detected from the computer.
Guide to setting the display resolution in Windows operating systems.
Instructions for updating graphics drivers if resolution options are missing.
Instructions on how to tilt the monitor for optimal viewing angle.
How to run the monitor self-test to diagnose issues.
How to use the monitor's built-in diagnostic tool to check for screen abnormalities.
Solutions for no power, no picture, or no brightness.
Solutions for fuzzy, blurry, ghosting, or shaky images.
Solutions for wavy or shaky video signals.
Solutions for dead pixels and stuck pixels on the LCD screen.
Solutions for brightness, geometric distortion, and line issues.
Solutions for scrambled, torn, missing, or wrong colors.
Guidance for safety concerns or intermittent monitor malfunctions.
Solutions for image retention, small images, and screen size issues.
Solutions for unresponsive controls or 'No Input Signal' messages.
Solutions for soundbar power issues and lack of audio output.
Solutions for distorted audio output from the soundbar.
Solutions for unbalanced sound output and low volume issues.
Important safety warnings and precautions for using the monitor.
Information regarding FCC compliance and other regulatory standards.
Information on how to contact Dell for support, sales, and service.
Steps for configuring dual monitors in Windows Vista.
Steps for configuring dual monitors in Windows 7.
Steps for configuring dual monitors in Windows 8/8.1.
Options for display styles in Windows Vista for multiple monitors.
Options for display styles in Windows 7 for multiple monitors.
Options for display styles in Windows 8/8.1 for multiple monitors.
To Next Page
