15" LCD Color Monitor Dell E157FPc
12
Language:
Language sets the OSD to display in one of five languages (English, Español, Français,
Deutsch, Japanese).
Note: The language chosen affects only the language of the OSD. It has no
effect on any software running on the computer.
Factory Reset:
'Factory Reset' returns the settings to the factory preset values for the selected group of
functions.
‘Exit’ is used to exit out of 'Factory Reset' menu.
For 'All settings', all user adjustable settings are reset at one time except 'Language
settings'.
OSD Warning Messages
A warning message may appear on the screen indicating that the monitor is out of sync.
Cannot Display This Video Mode
Optimum resolution 1024X768 60 Hz
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the
signal is too high or too low for the monitor to use. See Specifications for the Horizontal and Vertical frequency
ranges addressable by this monitor. Recommended mode is 1024 X 768 @ 60Hz.
Note: The floating 'Dell - self-test Feature Check' dialog will appear on-screen if the monitor cannot sense a
video signal.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not
synchronizing with the computer. See Troubleshooting for more information.
To Next Page
Loading...
Need help?
General
