Troubleshooting │ 41
Built-in diagnostics
Your monitor has a built-in diagnostic tool that helps you determine if any screen abnormality
you experience is an inherent problem with your monitor, or with your computer and video card.
4321
To run the built-in diagnostics:
1. Ensure that the screen is clean (no dust particles on the surface of the screen).
2. Press and Hold Button 1 for about 4 seconds and wait for a pop up menu.
3. Press Button 3 or 4 to select the diagnostic tool and confirm with Button 2.
A gray test pattern appears at the beginning of the diagnostic program.
4. Carefully inspect the screen for abnormalities.
5. Press Button 4 to change the test patterns.
6. Repeat steps 4 and 5 to inspect red, green, blue, black, white and text screens.
7. Press Button 4 to end the diagnostic program.
To Next Page
