Dell E2423H - Page 12

12 │ About your monitor
Electrical specifications
Model E2423H E2423HN
Video input
signals
• Analog RGB: 0.7 V ± 5 %, 75 Ω
input impedance
• DP 1.2, 600 mV for each
differential line, 100 Ω input
impedance per differential pair
• Analog RGB: 0.7 V ± 5 %, 75 Ω
input impedance
• HDMI 1.4, 600 mV for each
differential line, 100 Ω input
impedance per differential pair
Synchronization
input signals
Separate horizontal and vertical synchronizations,
polarity-free TTL level,
SOG (Composite SYNC on green)
AC input voltage/
frequency/current
100 VAC to 240 VAC/50 Hz or 60 Hz ± 3 Hz/1.5 A
Inrush current 30 A (120 V AC Input)
60 A (240 V AC Input)
Power
Consumption
0.3 W (Off Mode)
1
0.3 W (Standby Mode)
1
16 W (On Mode)
1
25 W (Max)
2
14.17 W (P
on
)
3
45.73 kWh (TEC)
3
1
As defined in EU 2019/2021 and EU 2019/2013.
2
Max brightness and contrast setting.
3
P
on
: Power consumption of On Mode as defined in Energy Star 8.0 version.
TEC: Total energy consumption in kWh as defined in Energy Star 8.0 version.
This document is informational only and reflects laboratory performance. Your
product may perform differently, depending on the software, components, and
peripherals you ordered, and shall have no obligation to update such information.
Accordingly, the customer should not rely upon this information in making
decisions about electrical tolerances or otherwise. No warranty as to accuracy or
completeness is expressed or implied.
NOTE: This monitor is ENERGY STAR certified.
This product qualifies for ENERGY STAR in the factory default settings which
can be restored by "Factory Reset" function in the OSD menu. Changing
the factory default settings or enabling other features may increase power
consumption that could exceed the ENERGY STAR specified limit.