Operating your monitor │ 41
Auto Adjust Use this option to activate automatic setup and adjust
menu.
Others
Personalize
Color
Display
B
Auto Adjust
rightness / Contrast
Dell 27 Monitor
Input Source
Menu
Press to adjust the screen automatically
The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjust allows the monitor to self-adjust to the
incoming video signal. After using Auto Adjustment, you
can further tune your monitor by using the Pixel Clock
(Coarse) and Phase (Fine) controls under Display.
NOTE: Auto Adjust does not occur if you press
the button while there are no active video input
signals or attached cables. This option is only
available when you are using the analog(VGA)
connector.
To Next Page
Loading...
