6. Connect the antenna cables to the appropriate optional WLAN, WPAN cards that came with your computer.
7. Replace the keyboard (see Replacing the Keyboard).
8. Replace the hinge cover (see Replacing the Hinge Cover).
9. Close the display and turn the computer over.
10. Replace the bottom of the base assembly (see Replacing the E5400 Bottom of the Base Assembly).
11. Follow the procedures in After Working on Your Computer.
E5400 Display Bezel
Removing the E5400 Display Bezel
1. Follow the instructions in Before Working on Your Computer.
2. Remove the hinge cover (see Removing the Hinge Cover).
3. Remove the keyboard (see Removing the Keyboard).
4. Remove the display assembly (see Removing the E5400 Display Assembly).
5. Starting at the middle bottom of the display panel, use your fingers to separate the bezel from the top cover, then lift the inside edges to separate the
remainder of the bezel.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
To Next Page
Loading...
