1. Gently connect the LED Dashboard cable to the system board using the tab close the cable's connector.
2. Slide the LED Dashboard cable in under the metal tab.
3. Place the LED Dashboard back into place by placing the left side under the plastic placeholder and ensure the plastic post comes through the hole in the
LED Dashboard. The right side of the LED Dashboard should be resting on the plastic placeholder just under it.
4. Replace the keyboard (see Replacing the Keyboard).
5. Replace the hinge cover (see Replacing the Hinge Cover).
6. Follow the procedures in After Working on Your Computer.
Back to Contents Page
To Next Page
Loading...
