Installation procedure for 4G and 5G
expansion modules
About this task
Installation of the 4G/5G expansion module requires an additional heat sink to ensure performance.
Use the paddle-style antennas that are included with the expansion kit. The following figure shows the dimensions of the
antenna.
42.0±0.3
184.0±1.0
38.5±0.5
210.0±1.0
13.0
±
0.3
13.0 ±0.3
A
A
Figure 5. 4G/5G/LTE antenna (dimensions in mm)
Table 1. Expansion module packing list - 4G
Item Quantity Notes
Screw M3 x 6L 1 Torque required: 4.0 kgf.cm
Screw M3 x 4L 7 Torque required: 4.0 kgf.cm
Standoff H7.8 1 Torque required: 4.5 kgf.cm
Standoff H19.5 2 Torque required: 4.5 kgf.cm
Bracket 1 -
4G M.2 1 -
SMA cable 3 -
Antenna 2 -
II
Installation procedure for 4G and 5G expansion modules 7
To Next Page
Loading...
