EasyManua.ls Logo

Dell EMC Edge Gateway 5200 - User Manual

Dell EMC Edge Gateway 5200
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Dell EMC Edge Gateway 5200
User's Guide
January 2022
Rev. A01

Table of Contents

Other manuals for Dell EMC Edge Gateway 5200

Question and Answer IconNeed help?

Do you have a question about the Dell EMC Edge Gateway 5200 and is the answer not in the manual?

Dell EMC Edge Gateway 5200 Specifications

General IconGeneral
Power Input12-57 VDC
Memory8GB DDR3L
Storage64GB
NetworkingDual Gigabit Ethernet
Form FactorCompact, rugged enclosure
Operating SystemWindows 10 IoT Enterprise
ConnectivityWi-Fi, Bluetooth, optional cellular
Ports2x USB 3.0, 1x USB 2.0, 1x RS-232/422/485, 1x CAN bus
Security FeaturesTPM 2.0, Secure Boot

Summary

Chapter 1: Introduction

Overview

General overview of the Dell EMC Edge Gateway 5200 platform and its application.

Features

Key features and specifications of the EGW-5200, including processor, memory, and I/O.

Packing list

List of items included in the package for the EGW-5200 system.

Optional accessories

List of optional accessories available for purchase to extend EGW-5200 functionality.

Chapter 2: Specifications

EGW-5200 system specifications

Detailed technical specifications for the EGW-5200 system hardware, including CPU, memory, and I/O.

Matrix of expansion modules

Table outlining available expansion modules and their corresponding connection interfaces.

Display options

Configurations for connecting multiple displays to the EGW-5200 with supported resolutions.

Mechanical dimensions

Physical dimensions and mounting information for the EGW-5200 device.

Chapter 3: System Layout

Front panel I;O

Description of the front panel connectors, ports, and indicators on the EGW-5200.

Internal I;O connectors

Locations and details of internal connectors on the mainboard for expansion and components.

Antenna connectors

Identification and function of all antenna connectors on the device for wireless communication.

Chapter 4: Getting Started

Attach the WiFi antennas

Step-by-step guide to attaching the WiFi antennas to the correct connectors on the device.

Attach DC power connector

Instructions for connecting the DC power connector and selecting an appropriate power source.

Power on and start up the operating system

Steps to power on the system and begin the operating system startup process.

Mount the device

Instructions for installing wall-mount brackets and securely mounting the device.

Expansion module installation

Information on installing various expansion modules to enhance the EGW-5200's capabilities.

Appendix A: Power consumption

Power consumption

Table detailing power consumption for different system configurations and operating loads.

Appendix B: BIOS Setup

Main

Overview of the main BIOS setup screen and general navigation options.

Advanced

Detailed configuration options for system hardware and features within the BIOS.

Security

BIOS settings for system security, including password protection and secure boot.

Boot

Configuration settings for system boot order and boot device selection.

Appendix C: Wireless Specifications

Wireless frequencies

Details on LTE and WCDMA frequency bands supported by the device.

Conducted Rx sensitivity and Tx power

Technical data on radio signal sensitivity and transmit power levels for wireless bands.

5 G features

Specifications and implementation details for 5G connectivity, including bands and MIMO.

Antenna interface specification

RF antenna interface specifications for LTE/5G NR bands, including typical values.

Appendix D: Important Safety Instructions

Important Safety Instructions

Critical safety warnings and precautions for device operation, handling, and battery replacement.

Appendix E: Compliance

NOM statement

Mexican Official Standard (NOM) compliance information for the device.

Agency compliance

FCC, IC, and EU regulatory compliance statements and requirements for the device.

Related product manuals