Dell EMC Edge Gateway 5200 User Manual

Network Stack Configuration
Figure 42. Network Stack Configuration
Table 33. Network Stack Configuration
Parameter Settings Description
Network Stack Disabled, Enabled Enable/disable UEFI Network Stack.
Ipv4 PXE Support Disabled, Enabled Enable/disable IPv4 PXE boot support. If disabled, IPv4 PXE
boot support is not available.
Ipv4 HTTP Support Disabled, Enabled Enable/disable IPv4 HTTP boot support. If disabled, IPv4
HTTP boot support is not available.
Ipv6 PXE Support Disabled, Enabled Enable/disable IPv6 PXE boot support. If disabled, IPv6 PXE
boot support is not available.
Ipv6 HTTP Support Disabled, Enabled Enable/disable IPv6 HTTP boot support. If disabled, IPv6
HTTP boot support is not available.
IPSEC Certificate Disabled, Enabled Support to enable/disable IPSEC certificate for Ikev.
PXE boot wait time 0 Wait time in seconds to press ESC key to abort the PXE boot.
Use either +/- or numeric keys to set the value.
Media detect count 1 Number of times the presence of media will be checked. Use
either +/- or numeric keys to set the value.
48 BIOS Setup

Dell EMC Edge Gateway 5200 Specifications

General

Brand	Dell
Model	EMC Edge Gateway 5200
Category	Gateway
Language	English