Table 43. Change Smbios Event Log Settings (continued)
Parameter Settings Description
counter of the log entry is updated. The value ranges from 1
to 255.
METW 60 Multiple Event Time Window: The number of minutes that
must pass between duplicate log entries which utilize a
multiple-event counter. The value ranges from 0 to 99
minutes.
Custom Options
Log EFI Status Code Disabled, Enabled Enable or disable the logging of EFI Status Codes as OEM
reserved type E0 (if not already converted to legacy).
Convert EFI Status Codes to
Standard Smbios Type
Disabled, Enabled Enable or disable the converting of EFI Status Codes to
standard Smbios types (not all may be translated).
NOTE: All values changed here do not take effect until the computer is restarted.
View Smbios Event Log
Figure 60. View Smbios Event Log
BIOS Setup
67
To Next Page
Loading...
Need help?
General
