Dell EMC PowerStore - Power Up System; Attach Front Bezel

Dell EMC PowerStore Quick Start Guide Page 6 of 8
8. Power up
a. Expansion enclosure
If installing PowerStore with an expansion enclosure, the order in which you power up the enclosures may differ. See
Installation and Service Guide for PowerStore 500T or the Installation and Service Guide for PowerStore 1000, 1200,
3000, 3200,5000, 5200, 7000, 9000, and 9200 at https://dell.com/powerstoredocs for power up details.
b. Base enclosure
Plug each power cable into the base enclosure power supply unit and close the retention bail over the base of the
power cable. Connect the other end of each power cable to PDU A and PDU B. After you connect the power cables,
the base enclosure automatically starts up.
9. Attach the bezel
1. Align the bezel with the expansion enclosure.
2. Gently push the bezel into place on the cabinet until it latches.
3. Lock the bezel with the provided key.
a. Base enclosure
b. Expansion enclosure
If installing PowerStore with an expansion enclosure, see the Installation and Service Guide for PowerStore 500T or
the Installation and Service Guide for PowerStore 1000, 1200, 3000, 3200,5000, 5200, 7000, 9000, and 9200 at
https://dell.com/powerstoredocs for instructions.
2
1