Dell EMC VxFlex Series - Vxflex os Packages

Table 3 Linux (continued)
Component Requirement
Additional requirements for specific operating
systems
SLES 12.4:
l
hwinfo
l
net-tools
l
pciutils
l
ethtool
Hypervisor support: Red Hat KVM
Additional packages required for MDM
components
bash-completion (for SCLI completion)
Latest version of Python 2.X
Secure authentication mode Ensure that OpenSSL 64-bit v1.0.1 or later is installed on all servers in the
system:
libopenssl1_0_0-1.0.1g-0.40.1.x86_64.rpm
openssl1-1.0.1g-0.40.1.x86_64.rpm
Note: (v1.1 is not supported)
LDAP Ensure that OpenLDAP 2.4 is installed on all servers
Table 4 Windows
Component Requirement
Supported OS versions 2019 (GUI, SDC, and LIA)
Including the Visual C++ redistributable 2010 package, 64-bit
Secure authentication mode Ensure that the following are installed on all servers in the system:
l
OpenSSL 64-bit v1.0.1 or later (v1.1, however, is not supported)
l
Visual C++ redistributable 2010 package, 64-bit
Note: Windows OS is supported for the VxFlex OS Gateway and SDC, and is required for LIA. Windows OS is not
supported in Core systems (MDM and SDS). For specific VxFlex OS Gateway requirements, see VxFlex OS
component requirements on page 13.
VxFlex OS packages
Download the VxFlex OS complete software ZIP file and extract the folders for your operating system.
The files can be downloaded from the Support site. Refer to the EMC Simple Support Matrix (ESSM) for supported
versions.
Note:
You are also required to download and extract the VxFlex OS GUI for Windows Software Download.
For Linux 2-layer/storage-only, the VxFlex OS Complete VMware Software Download is also required.
VxFlex Ready Node deployment overview
12 VxFlex Ready Node Operating System Installation Guide for Linux