PS5000 Hardware Maintenance Basic Array Information
1–2
Interpreting Operations Panel LEDs
The PS5000 operations panel monitors array hardware components. The panel is
not redundant, but an array can continue to operate if it fails. See your array
support provider for information about servicing the operations panel.
Figure 1-3 shows the operations panel LEDs, which can alert you to errors and
conditions that require your attention. Table 1-1 describes the LEDs. Serious
problems should be reported to your array support provider.
For information about other array LEDs, see Interpreting Disk LEDs on page 2-1,
Interpreting Control Module LEDs on page 3-2, and Interpreting Power Supply
and Cooling Module LEDs on page 4-1.
Figure 1-3: Operations Panel LEDs
Table 1-1: Operations Panel LED Descriptions
Operations LED Color Description
Power (upper right) Off No power.
Green Power.
Array locator (upper left) Off No power or normal condition.
Flashing
orange
Administrator enabled the array locator function.
To Next Page
Loading...
