Dell Force10 S2410-01-10GE-24P - Page 18

18 | Installing the S2410
www.dell.com | support.dell.com
2 Insert the S2410 into the rack, and secure the chassis to the front post with two screws. Then secure the chassis to
the rear posts with two screws.
Figure 4-4. Four-post Rack-mounting with Adjustable Rear-mounting Brackets, Step 2
3 Set the adjustable rear mounting bracket to the length (one of three lengths) for your bracket. Secure the length
with the four screws.
Figure 4-5. Four-post Rack-mounting with Adjustable Rear-mounting Brackets, Step 3
Step Task
fn00147s2410