Need help?Do you have a question about the Dell Force10 S25-01-GE-24P and is the answer not in the manual?
General| Form Factor | 1U |
|---|---|
| Ports | 24 x 10/100/1000BASE-T |
| VLANs | 4094 |
| MAC Address Table Size | 16000 entries |
| Jumbo Frame Support | 9216 bytes |
| Storage Temperature | -40°C to 70°C |
| Power Supply | AC |
Provides an overview of the installation guide and its purpose.
Explains graphic symbols used to alert users to hazards during installation and handling.
Lists other documents relevant to the S25P system and its software.
Lists the necessary items and optional components for installing the S25P system.
Details the technical specifications and capabilities of the S25P switch.
Describes the different types of ports available on the S25P system, including SFP, RJ45, and expansion slots.
Explains how to derive the S25P system status via LEDs, boot menus, and CLI commands.
Details the status indicators on the S25P front panel and their meanings.
Outlines the environmental and safety requirements for choosing an installation location for the S25P.
Specifies criteria for placing the S25P within a cabinet or rack for proper airflow and access.
Details methods for mounting the S25P in a rack, including two-post and four-post options.
Addresses the importance of proper ventilation and airflow for the S25P system.
Explains power supply requirements and connections for the S25P and S25P-DC models.
Provides guidelines for safely storing the S25P and its components before installation.
Lists the tools necessary for installing the S25P system and its accessories.
Describes how to install optional 10GbE and stacking modules into the S25P chassis.
Provides instructions for placing the S25P on a stable surface.
Details procedures for mounting the S25P in a rack or cabinet using different methods.
Explains how to connect multiple S25P units together to form a stack.
Covers the procedures for connecting power to the S25P system.
Specific instructions for connecting power to the DC-powered version of the S25P.
Guides users on connecting to and configuring the console port for initial setup.
General information on installing optical transceivers for the S25P system.
Step-by-step instructions for inserting SFP transceivers into the S25P.
Step-by-step instructions for inserting XFP transceivers into the S25P.
Details the physical dimensions, weight, and rack clearance of the S25P chassis.
Lists operating and storage conditions, including temperature, humidity, and altitude limits.
Specifies voltage, current draw, and power consumption for the S25P and S25P-DC.
Outlines the safety and regulatory compliance statements for the S25P system.
Lists the safety standards and agency certifications the S25P complies with.
Details the EMC emissions and immunity standards relevant to the S25P.
Provides information on the responsible recycling and disposal of the S25P system.
Information on accessing Force10's online support portal for documentation and assistance.
Details on how to reach Force10 TAC for support issues.
Instructions on how to find the serial numbers for the S25P chassis and modules.
Steps involved in requesting replacement hardware for the S25P system.
To Next Page
