NOTE: Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup program.
Make the appropriate changes again after you replace the system board.
About this task
The following image indicates the connectors on your system board.
1. Display cable 2. Power-adapter port cable
3. Fan cable 4. I/O-board cable
5. Speaker cable 6. Keyboard cable
7. Keyboard backlit cable 8. Touchpad cable
9. 4 zone keyboard cable 10. Power-button cable
The following image indicates the location of the system board and provides a visual representation of the installation procedure.
42
Removing and installing components
To Next Page
Loading...
