Identifier GUID-AB1F153B-621B-42FC-89BE-0E1105FF1786
Status Released
Removing the display assembly
WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside
your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/
regulatory_compliance.
Identifier GUID-7E5DC50B-52E4-450D-A406-E41951E197AB
Status Released
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
Identifier GUID-0DB1BB01-F8CB-4790-BA6D-6B2665AE0DA1
Status Released
Procedure
1 Open the latch and disconnect the display cable from the system board.
2 Note the routing of the display cable and remove the cable from its routing guides on the fan and palm rest and keyboard assembly.
3 Remove the six screws (M2.5x6) that secure the left and right hinges to the system board and palm rest and keyboard assembly.
29
60 Removing the display assembly
To Next Page
Loading...
