About this task
The following images indicate the location of the base cover and provide a visual representation of the removal procedure.
Steps
1. Remove the seven screws (M2x3) that secure the light bar to the base cover.
2. Lift the light bar off the base cover.
Installing the light bar
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
NOTE:
Please note that this procedure is applicable only for computers shipped with Nvidia GeForce GTX 1660 Ti/Nvidia
GeForce RTX 2060/Nvidia GeForce RTX 2070 MQ.
The following images indicate the location of the base cover and provide a visual representation of the installation procedure.
Removing and installing components
17
To Next Page
Loading...
