Table 2. Antenna-cable color scheme (continued)
Connectors on the wireless card Antenna-cable color
Auxiliary (black triangle) Black
2. Slide and place the wireless-card bracket on the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot.
4. Slide the wireless card at an angle into the wireless-card slot.
5. Replace the screw (M2x3) that secures the wireless card to the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Solid-state drive/Intel Optane
Removing the solid-state drive/Intel Optane
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the left-side cover.
About this task
The following images indicate the location of the solid-state drive/Intel Optane and provides a visual representation of the removal
procedure.
NOTE:
You need to disable the Intel Optane before removing it from your computer. For more information about
disabling the Intel Optane, see Disabling Intel Optane.
24 Removing and installing components
To Next Page
Loading...
