• 10
th
Generation Intel Core i5-10600KF
• 10
th
Generation Intel Core i7-10700K
• 10
th
Generation Intel Core i7-10700KF
• 10
th
Generation Intel Core i9-10900K
• 10
th
Generation Intel Core i9-10900KF
About this task
The following images indicate the location of the voltage regulator heat sink and provides a visual representation of the installation
procedure.
Steps
1. Align and place the voltage regulator heat sink on the system board.
2. Tighten the two captive screws that secure the voltage regulator heat sink to the system board.
Next steps
1. Install the left-side cover.
2. Follow the procedure in After working inside your computer.
Processor
Removing the processor
Prerequisites
1. Follow the procedure in Before working inside your computer.
36
Removing and installing components
To Next Page
Loading...
