About this task
Figure 2. System-board components
1. front LED cable connector (PWR SW)
2. LED daughter-board
3. hard-drive data cable connector (SATA0)
4. hard-drive power cable connector (SATA PWR)
5. power-supply unit cable connector
6. wireless-card slot
7. coin-cell battery
8. solid-state drive connector (m.2 PCIe SSD)
9. PCIe x16 slot
10. chassis-fan cable connector (FAN SYS)
11. processor-power cable connector (ATX CPU1)
12. processor-power cable connector (ATX CPU)
13. processor
14. memory-module slot (DIMM3)
15. memory-module slot (DIMM1)
16. memory-module slot (DIMM4)
17. memory-module slot (DIMM2)
The following images indicate the location of the system board and provides a visual representation of the installation procedure.
Removing and installing components
47
To Next Page
Loading...
