Table 5. System setup options—System Configuration menu (continued)
System Configuration
SATA-3 Displays the SATA device information of the computer.
M.2 PCIe SSD-2 Displays the M.2 PCIe SSD information of the computer.
SMART Reporting Enable or disable SMART Reporting during system startup.
USB Configuration
Enable Boot Support Enable or disable booting from USB mass storage devices such as external hard
drive, optical drive, and USB drive.
Enable Front USB Ports Enable or disable the front USB ports.
Enable Rear USB Ports Enable or disable the rear USB ports.
Front USB Configuration Enable or disable the front USB ports.
Rear USB Configuration Enable or disable the rear USB ports.
Audio Enable or disable the integrated audio controller.
Table 6. System setup options—Video menu
Video
Multi-Display Enable or disable multiple displays.
Primary Display Set or change the primary display.
Table 7. System setup options—Security menu
Security
Internal HDD-2 Password Set, change, or delete the internal hard-disk drive password.
Internal HDD-3 Password Set, change, or delete the internal hard-disk drive password.
M.2 SATA SSD Password Set, change, or delete the M.2 solid-state drive password.
Strong Password Enable or disable strong passwords.
Password Configuration Control the minimum and maximum number of characters allowed for Admin and
System passwords.
Password Change Enable or disable changes to the System and Hard Disk passwords when an
administrator password is set.
UEFI Capsule Firmware Updates Enable or disable BIOS updates through UEFI capsule update packages.
PTT Security
PTT On Enable or disable Platform Trust Technology (PTT) visibility to the operating system.
Clear Default: Disabled
PPI ByPass for Clear Command Enable or disable the TPM Physical Presence Interface (PPI). When enabled, this
setting will allow the OS to skip BIOS PPI user prompts when issuing the Clear
command. Changes to this setting take effect immediately.Default: Disabled
Absolute(R) Enable or disable the BIOS module interface of the optional Computrace(R) Service
from Absolute Software.
Master Password Lockout Disables the master password support. Hard Disk passwords need to be cleared
before changing the setting.
SMM Security Mitigation Enable or disable SMM Security Mitigation
Table 8. System setup options—Secure Boot menu
Secure Boot
Secure Boot Enable Enable or disable the secure boot feature.
System setup 55
To Next Page
Loading...
