Dell G7 15 - Base

Base
1 Touchpad
Move your nger on the touchpad to move the mouse pointer. Tap to left-click and two nger tap to right-click.
2 Left-click area
Press to left-click.
3 Right-click area
Press to right-click.
4 Power button with optional ngerprint reader
Press to turn on the computer if it is turned o, in sleep state, or in hibernate state.
When the computer is turned on, press the power button to put the computer into sleep state; press and hold the power button for
10 seconds to force shut-down the computer.
If the power button has a ngerprint reader, place your nger on the power button to log in.
NOTE
: Before using the ngerprint reader, congure it in Windows to recognize your ngerprint as a passcode and enable
access. For more information, see www.dell.com/support/windows.
NOTE: You can customize power-button behavior in Windows. For more information, see Me and My Dell at www.dell.com/
support/manuals.
NOTE: The power-status light on the power button is available only on computers without the optional ngerprint reader.
Computers shipped with the ngerprint reader integrated on the power button will not have the power-status light on the
power button.
Views 11