3. Remove the solid-state drive from M.2 slot two.
About this task
NOTE: If there is only one solid-state drive in the configuration you ordered, you can install another solid-state drive in the
other M.2 slot. However, you may need a solid-state drive bracket (sold separately; please contact Dell support) to install
the additional solid-state drive.
The following image provides a visual representation of the installation procedure.
Steps
1. Remove the screw (M1.6x2) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
2. Remove the solid-state drive bracket from the support bracket slot.
3. Depending on the type of solid-state drive (M.2 2230/M.2 2280), align and insert the solid-state drive bracket into the
bracket slot.
4. Replace the screw (M1.6x2) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
5. Install the solid-state drive.
WLAN card
Removing the WLAN card
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the base cover.
About this task
The following images indicate the location of the WLAN card and provide a visual representation of the removal procedure.
34
Removing and installing components
To Next Page
Loading...
