Screw list
NOTE: When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE: Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE: Screw color may vary with the configuration ordered.
Table 25. Screw list
Component Screw type Quantity Screw image
Base cover M2x4
Captive screws
NOTE: Screws are
part of the base
cover.
6
2
3-cell battery M2x3 3
4-cell battery M2x3 5
M.2 2230 solid-state drive
(SSD) extension bracket
M2x3
M2x1.8
1
1
M.2 2280 solid-state drive
(SSD)
M2x3 1
Wireless-card bracket M2x3 1
Fan M2x3 2
Heat sink Captive screws
NOTE: Screws are
part of the heat sink.
4
Touchpad M2x2
M1.6x2.5
2
4
Display hinges M2.5x3.5 4
I/O board M2x3 1
Power button with optional
fingerprint reader
M2x3 1
30 Working inside your computer
To Next Page
Loading...
