Create a USB recovery drive for
Windows
Create a recovery drive to troubleshoot and x problems that may occur with
Windows. An empty USB ash drive with a minimum capacity of 16 GB is required to
create the recovery drive.
NOTE: This process may take up to an hour to complete.
NOTE: The following steps may vary depending on the version of Windows
installed. Refer to the Microsoft support site for latest instructions.
1 Connect the USB ash drive to your computer.
2 In Windows search, type Recovery.
3 In the search results, click Create a recovery drive.
The
User Account Control window is displayed.
4 Click
Yes to continue.
The Recovery Drive window is displayed.
5 Select Back up system les t
o the recovery drive and click Next.
6 Select the USB ash driv
e and click Next.
A message appears, indicating that all data in the USB ash drive will be deleted.
7 Click
Create.
8 Click
Finish.
For more information about reinstalling Windows using the USB recovery drive,
see the Troubleshooting section of your product's Service Manual at
www.dell.com/support/manuals.
Reinstall Windows using a USB recovery drive
CAUTION
: This process formats the hard drive and removes all data on your
computer. Ensure that you back up data on your computer before beginning
this task.
7
Проконсультироваться и купить данное оборудование вы можете в компании «АНД-Системс»
адрес: 125480, г.Москва, ул.Туристская, д.33/1; site: https://andpro.ru тел: +7 (495) 545-4870 email: info@andpro.ru
При обращении используйте промокод AND-PDF и получите скидку.
To Next Page
Loading...
