Removing the touch pad
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in Before
working inside your computer. After working inside your computer, follow
the instructions in After working inside your computer. For more safety best
practices, see the Regulatory Compliance home page at
www.dell.com/
regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the battery.
3 Remove the rear cover.
4 Follow the procedure from step 1 to step 8 in “Removing the palm rest and
keyboard assembly.
Procedure
1 Peel o the tape that secures the touch pad to the palm rest and keyboard
assembly.
2 Remove the four screws (M2x2) that secure the touch pad to the palm rest and
keyboard assembly.
66