40 | Display Assembly
Replacing the Hinge Caps
Procedure
1 Slide the antenna cables through the slot on the hinge cover
2 Align the screw holes on the hinge caps with the screw holes on the display cover.
3 Replace the screws that secure the hinge caps to the display cover.
Postrequisites
1 Replace the display bezel. See "Replacing the Display Bezel" on page 38.
2 Replace the display assembly. See "Replacing the Display Assembly" on page 37.
3 Replace the palm rest. See "Replacing the Palm Rest" on page 31.
4 Replace the base cover. See "Replacing the Base Cover" on page 18.
5 Replace the keyboard. See "Replacing the Keyboard" on page 16.
6 Replace the battery. See "Replacing the Battery" on page 13.
Removing the Display Panel
Prerequisites
1 Remove the battery. See "Removing the Battery" on page 13.
2 Remove the keyboard. See "Removing the Keyboard" on page 15.
3 Remove the base cover. See "Removing the Base Cover" on page 17.
4 Remove the palm rest. See "Removing the Palm Rest" on page 27.
5 Remove the display assembly. See "Removing the Display Assembly" on page 35.
6 Remove the display bezel. See "Removing the Display Bezel" on page 37.
7 Remove the hinge caps. See "Removing the Hinge Caps" on page 39.
To Next Page
Loading...
