Dell INSPIRON 15r - Replacing the Thermal-Cooling Assembly

Thermal-Cooling Assembly | 57
Replacing the Thermal-Cooling Assembly
Procedure
1 Align the screw holes on the thermal-cooling assembly with the screw holes on the
system board.
2 In sequential order (indicated on the thermal-cooling assembly), replace screws
that secure the thermal-cooling assembly to the system board.
Postrequisites
1 Follow the instructions from step 3 to step 10 in "Replacing the System Board" on
page 52.
2 Replace the palm rest. See "Replacing the Palm Rest" on page 31.
3 Replace the keyboard. See "Replacing the Keyboard" on page 16.
4 Follow the instructions from step 4 to step 5 in "Replacing the Optical Drive" on
page 26.
5 Follow the instructions from step 4 to step 6 in "Replacing the Hard Drive" on
page 23.
6 Replace the memory module(s). See "Replacing the Memory Module(s)" on
page 20.
7 Replace the base cover. See "Replacing the Base Cover" on page 18.
8 Replace the battery. See "Replacing the Battery" on page 13.
9 Follow the instructions in "After Working Inside Your Computer" on page 9.