System Board | 51
3 Disconnect the power-adapter port cable, fan cable, and speakers cable from the
connectors on the system board.
4 Peel the tape that secures the display cable to the system board and then
disconnect the display cable from the connector on the system board.
5 Lift the connector latch and pull the pull-tab to disconnect the Media Card Reader
cable from the connector on the system board.
.
1 power-adapter port cable 2 fan cable
3 system-board assembly 4 speakers cable
5 connector latch 6 pull-tab
7 Media Card Reader cable 8 display cable
9tape
To Next Page
Loading...
