Dell Inspiron 20-3052 User Manual

Replacing the optical drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the optical-drive bracket with the screw holes
on the optical drive.
NOTE: You must correctly align the optical-drive bracket to ensure
that the optical drive can be properly secured to the computer. For
correct orientation, see step 5 in "Removing the optical drive".
2 Replace the screws that secure the optical-drive bracket to the optical
drive.
3 Align the tabs on the optical-drive bezel with the slots on the optical-
drive assembly and snap it into place.
4 Slide the optical-drive assembly into the optical-drive bay and snap it into
place.
Post-requisites
Replace the stand.
22

Dell Inspiron 20-3052 Specifications

General

Processor	Intel Celeron N3050
Display	19.5-inch HD+ (1600x900) Anti-Glare LED-Backlit Display
Graphics	Intel HD Graphics
Operating System	Windows 10 Home
Wireless	802.11b/g/n, Bluetooth 4.0
Ports	2 x USB 3.0, 2 x USB 2.0, HDMI, RJ-45
Audio	Stereo speakers, Waves MaxxAudio
Webcam	720p webcam
RAM	4GB DDR3L
Storage	500GB
Dimensions	490.7mm x 36.7mm x 309.7mm