Dell Inspiron 2000 - I;O Device Configuration Submenu

B-6 Dell Inspiron 2000 System Reference and Troubleshooting Guide

&'(
See Figure B-3 and Table B-3 for an explanation of the options and settings on the I/O
Device Configuration submenu.
176/)!$
+- 
+++ *+
 ;+
,#5 C,A2C
>+*,!++ 4
9,!
 
>0 
4,5-6+
8/+- ↑↓
↑↓↑↓
↑↓+, -941:+ 8"-!7+
9 ↔
↔↔
↔+ + *; 8
,-7/+-
971+
615-
,#5!971

"$%176/)!$6'
& 
Serial port A Enabled sets the Serial port A: Base I/O Address to 3F8h
IRQ4. If there is a conflict between two or more addresses,
an asterisk appears next to the port type. Disabled disables
the serial port to conserve power.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the
system Help.