Removing the stand assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure to remove easel stand
NOTE: The type of stand assembly varies depending on the
configuration you ordered.
1 Place the computer face down on a soft cloth or a clean surface.
2 Using your fingertips, lift the stand cover.
3 Slide and remove the stand cover at an angle away from the stand.
1 stand 2 stand cover
3 back cover
4 Remove the screws that secure the stand bracket to the back cover.
14
To Next Page
Loading...
