Replacing the microphone
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Connect the microphone and camera cable to the microphone-board.
2 Slide the microphone board into the slot on the display bezel.
3 Follow the procedure from step 1 to step 3 in ”Replacing the camera".
4 Route the microphone and camera cable through the routing guides on
the display-assembly base.
5 Connect the microphone and camera cable to the system board.
Post-requisites
1 Replace the back cover.
2 Replace the stand assembly.
50
To Next Page
Loading...
